Homepage      Favorite      中文版
            Home About Us News info Products Services Recruitment Contact us
            NEWS CENTER
            Company News
            Trade News
            Exhibitions
            Videos
            CONTACT US
            Headquarter: No. 18, Yangguang Road, Xinyang Industrial Area, Haicang, Xiamen, P.R.China 361022
            Tel: +86-592-6539999
            E-mail: bussiness@xmzzj.com

            NEWS CENTER
            Location:Home → News Center
            Excavator also bitter summer! Midsummer approaching, excavator "three high" how to treat?
            Public date:2021-1-15   Hits:10085

            There are many projects in summer, which is exactly the season of frequent failure of excavators. "Three height" is a common fault in summer construction of excavators, which is the main factor leading to fault shutdown.

            The temperature of the tank is too high, commonly known as "boiling". "Boiling" affects the normal heat dissipation of the engine, and then causes the high temperature expansion and deformation of the parts in the engine, such as the piston and piston ring, which are heated to expand and get stuck. At the same time, high temperature intensifies the oxidation of oil and speeds up the wear of moving parts. To prevent "boiling", the old drivers have their own tricks, someone refit the water tank, someone adds air cooling, someone simply remove the cover of the water tank.
            In fact, under the premise of not destroying the appearance, the correct use of antifreeze can effectively avoid boiling. Antifreeze has two characteristics: low freezing point, high boiling point. Therefore, it can not only keep the vehicle system working in the winter, but also prevent the cooling water boiling in the summer. The antifreeze antirust and anti-corrosion function can also slow down the aging of the entire cooling system, and the anti-scale function can prevent the scale from blocking the circulating pipeline.

            When the hydraulic oil temperature is too high, the viscosity, lubricity and wear resistance of the oil will significantly decrease, which will not only lead to the increase of leakage, the oil film of the sliding parts will also be destroyed, so that the wear of the hydraulic components is aggravated, so the hydraulic oil with slightly higher viscosity should be selected in summer. The conventional temperature of the hydraulic oil is between 30℃ and 55℃. When the temperature of the hydraulic oil continues to increase, the hydraulic components expand according to different coefficients, and the stuck fault may occur, and the downtime is inevitable. Preventing high temperature of hydraulic oil depends on daily inspection and maintenance, such as regularly dusting and cleaning the radiator, which can maintain heat dissipation performance.

            Grease temperature is too high, will lead to soft grease, reduce adhesion performance, easy to lose. At this time, the working device and rotary device will cause high temperature, wear, noise and other "unsatisfactory" because of poor lubrication. The main reason of grease failure is the shrinkage of gel and the evaporation loss of base oil. High temperature is the culprit that leads to the increase of grease evaporation, oxidation deterioration and serious condensation and oil separation. Therefore, in summer, we must choose a grease with good high temperature performance, not only to maintain the adhesion performance at a high temperature, but also to ensure that the failure process is slow.

            In summer, vegetation is luxuriant, insects and birds are active, and it is difficult to guarantee that there will not be flying insects at risk into the compartment, it is difficult to guarantee that there will not be catkins adsorbed to the water tank, and there will not be withered branches and rotten leaves stuffed into the radiator. These are the hidden dangers that cause the high temperature of the engine, the high temperature deterioration of the hydraulic oil, and the bad air-conditioning refrigeration. Moreover, some "old" excavators, water tanks and radiators at the cover, sponge damage or fall off, resulting in abnormal fan suction, may cause poor heat dissipation.

            Good operators have good maintenance habits, such as cleaning and removing impurities at leisure; Always pay attention to the number of water temperature table; When the water temperature is high, idle speed to cool down in the nearest shade; Check frequently whether the antifreeze is missing; Frequently check the tension and fatigue of the fan belt... Are good habits to ensure the healthy construction of excavators. In addition, when the engine temperature of small excavator is too high, do not immediately flameout to prevent the engine internal overheating and causing cylinder pulling accident. It should be flameout and stop after idling and cooling.

            Idle time to park the equipment in the shade to cool down, but by all means do not use cold water pouring tires, pouring brake to force cooling.

            The construction of crawler excavator after rain should pay attention to: when the water overflowing the rotary ring gear, the grease in the ring gear should be replaced in time to prevent the sand mixed in the grease, which leads to the wear of the gear and ring gear. When wading, do not make the tilt Angle of the excavator more than 15° to avoid invading the water and damaging the radiator. Rainy summer, the crawler tight cylinder should also be often dredged to prevent rust.

            Previous  |  Next  |   Return to
            About Us
            Company profile
            Culture
            Organizational
            Development
            Subsidiaries
            Certificates
            Products
            Wheel Loader
            Block Handling Wheel Loader
            Excavator
            Other
            Spare Parts
            News
            Company News
            Trade News
            Exhibitions
            Videos
            Services
            Marketing
            After Services
            Question
            Downloads
            Recruitment
            Talent Concept
            Jobs
            Contact Us
            Feedback
            Contact us
            Copyright 2014- (C) Xiamen Loaders Co., Ltd. All Rights Reserved.
            Two-dimensional [Close]

            點(diǎn)擊這里給我發(fā)消息
            點(diǎn)擊這里給我發(fā)消息
            亚洲人成色7777在线观看| 天天综合亚洲色在线精品| 亚洲一级特黄大片无码毛片 | 四虎必出精品亚洲高清| 亚洲视频在线观看网址| 久久久久亚洲精品日久生情 | 亚洲精品无码高潮喷水A片软| 亚洲一区欧洲一区| 亚洲最大天堂无码精品区| 在线综合亚洲中文精品| 亚洲kkk4444在线观看| 中文字幕亚洲综合小综合在线| 亚洲伊人久久大香线蕉结合| 亚洲日韩国产精品乱-久| 中文字幕乱码亚洲无线三区| 亚洲av成人一区二区三区| 国产精品亚洲自在线播放页码 | 国产成人精品日本亚洲| 亚洲AV无码乱码国产麻豆| 亚洲综合婷婷久久| 亚洲精品中文字幕无乱码| 亚洲国产精品成人精品小说| 亚洲精品第一综合99久久| 亚洲国产高清国产拍精品| 成人精品国产亚洲欧洲| 亚洲国产精品无码久久久久久曰| 国产成人精品久久亚洲高清不卡 | 4338×亚洲全国最大色成网站| 不卡精品国产_亚洲人成在线| 亚洲情XO亚洲色XO无码| 亚洲国产成人久久综合碰碰动漫3d| 91亚洲国产成人精品下载| 亚洲免费在线视频播放| 亚洲欧洲免费无码| 亚洲精品无码99在线观看 | 国产精品亚洲不卡一区二区三区| 亚洲欧洲精品无码AV| 亚洲伦另类中文字幕| 亚洲伊人色一综合网| 亚洲成av人无码亚洲成av人| 亚洲国产午夜中文字幕精品黄网站|